Cutting

Manufacture

Cutting

quickly and accurately

quickly and accurately

better use of the material

better use of the material

the best software CNC

the best software CNC

thicknesses up to 30mm

thicknesses up to 30mm

slot cut 0.20mm

slot cut 0.20mm

Laser cutting
The laser cutting is a thermal cutting process in which the laser beam serves as a useful. The width of the cutting slot is very small and constant.
The advantages are: very fast, high accuracy and quality of cut pieces, cut a complex geometry, accuracy of ± 0.1mm, very small heat affected zone, a variety of materials to cut

Court for punching
Process caused by mechanical shear. Speakers two tools, one that is placed at the bottom of the sheet to punching or matrix, and another is placed at the top or punch.
The compression of the material creates a distortion, as it moves penetration punch in the material begin cracking at the edges of contact between the punch and the part and the matrix and the part, and as such move is a breaking cracks or divide that it separates the steel material cut, the two overlap and cracks penetrating punch continues to cause the removal of the material cut.
The advantages are: It allows cutting and forming operations, cheaper than the laser to cut strokes repetitive, very fast up to 2500 strokes per minute

Court for Sierra
It automatically cut longs by mountains. The cut is straight or bias. It is ideal for cutting solid (squares, strips, bars, rods), tubes and profiles.

Court shear
The shear has the same operating a scissor normal.
Only court can only be used straight sheet. The advantage is that you do not need programming, and the court is cheap.